Hammer Test Proceq Original Schmidt Type N @ Cex harga call 082124100046

Jl,haji Kelik No 20 Kelapa Dua Kebon Jeruk Jakarta Barat 11550
(Bengkulu)
Indonesia

About the business

Concrete Rebound Test Hammer – Original Schmidt
The quality of concrete is mainly judged by its compressive strength directly affecting the load-bearing capacity and durability of concrete structures. Proceq invented the Original Schmidt, the world’s first and now most widely used test hammer for analyzing the compressive strength of concrete properties.
The Original Schmidt will hit the concrete at a defined energy whereas its rebound is dependent on the hardness of the concrete and is measured by the instrument. The Original Schmidt is available in models with different impact energies. Each test hammer is designed for a specific test application, in order to meet the needs of the customers to investigate a wide range of material types and sizes, such as bridge decks, thin walls, cast stone components or small components.
Features
Type N Original Schmidt: Rebound values are read from a scale for subsequent calculation of the mean. Compressive strength values can be read from a conversion diagram
Type NR Original Schmidt: Rebound values are recorded as a bar chart on a paper strip which has a capacity for 4’000 test impacts
Type L Original Schmidt: Handling equals type N, but the type L offers an impact energy three times smaller
Type LR Original Schmidt: Handling equals type NR, but with impact energy three times smaller. The LR also features a paper strip for recording up to 4’000 test impacts without reloading
Applications
Ideally suited for on-site tests of concrete
The concrete test hammer is suitable for testing a wide variety of concrete, mortar and rock, but also for testing metal castings
Handy for difficult to access or confined test areas (i.e. working overhead)
Assessment on young, soft concrete with mushroom plunger of the concrete test hammer, eg. asphalt strength testing
It can be even used for underwater applications
Combining Methods to Evaluate Concrete Strength
Product Variations
Concrete test hammer SilverSchmidt Type ST N – Standard impact energy (2.207 Nm)
Concrete test hammer SilverSchmidt Type ST L – Reduced impact energy (0.735 Nm)
Concrete test hammer SilverSchmidt Type PC N – Standard impact energy (2.207 Nm) with PC communication, increased memory capacity and Hammerlink
The following standards can be applied to the concrete test hammer:
EN12504-2 (European Standard)
ASTM C 805 (North American Standard)

JGJ/T 23-2001 (Chinese Standard)
Technical Data
Mechanical data Type ST N / PC N
concrete test hammer
Type ST L / PC L
concrete test hammer
Impact energy 2.207 Nm 0.735 Nm
Hammer mass 135 g 135 g
Spring constant 0.79 N/mm 0.26 N/mm
Spring extension 75 mm (2.95”) 75 mm (2.95”)
Housing dimensions 55 x 55 x 255 mm (2.16” x 2.16” x 9.84”)
Weight 570 g (1.3 lb)
PC application
Only for the concrete test hammer SilverSchmidt versions PC N and PC L: Hammerlink Software
Electrical data
Display 17 x 71 pixels; graphic / alphanumeric
Power consumption ~13 mA measuring, ~4 mA setup and review, ~0.02 mA idle
Battery life >5000 impacts (before recharging)
Charger connection USB type B (5V, 100 mA)
Measuring ranges
Concrete compressive strength 10-100 N/mm2 (1450-14500 psi)
Operating temperature 0 to 50 °C (32 to 122 °F)
Storage temperature -10 to 70 °C (14 to 158 °F)

MARGASETIA SURVEY
Berdagang alat- alat Kelautan, Alat Selam, Perahu Karet, Rescue/Alat Keselamatan,
GPS Garmin, GPS Magellan, Alat Survey, Alat Ukur dan Aksesoris Alat Ukur.
Current Meter.Anemometer ,Anemometer Wireless,Weather station
Untuk keterangan, nego harga dan informasi produk lainnya, hubungi :
Toko Marga setia
Alamat : Jalan H.Kelik No.20 RT.03 / RW.08 Kelapa Dua Kebon Jeruk Jakarta Barat
tatang ms
082124100046

Tinggalkan komentar Anda (spam dan pesan ofensif akan dihapus)

Related listings